New Tools

Every new project needs new tools, am I right ūüôā ¬†Here’s a brief rundown of new Amazon orders I splurged on, most are directly related to working with the butterfly joints.

 

Bosch Router w/ Plunge Adapter

Bosch Router Quick adapter

This installs onto the bottom of the router plate and is required for using an inlay router kit, like the below Whiteside 9500 kit.

Whiteside Router Bits 9500 Solid Brass Inlay Kit

 

Bowtie Template

Some folks like to create their bow-ties free hand, then outline on the slab and go to work manually carving out the recess.  For other beginners, this template makes it super handy in-conjunction with the Whiteside kit above.  You can use this template for both the bow-tie and inlay section of the slab itself.

Japanese Flush Saw

Not necessary, but sure does save time knocking down the stock when inserting the butterfly, or even getting trimming the bowtie after you get the outline cut using the template.

Cherry Slab Table

A few months back I came across a local wood shop selling live edge wood slabs. I’ve always admired the raw, natural look and beauty of slabs so decided to go check them out in person one day at lunch.

That was about 3 months ago; guess what showed up today ūüôā

It measures roughly 11′ long, 3′ at the narrow¬†end to 4′ with a gradual taper. ¬†It is stickin’ huge! More than¬†a tad scary how much work is still needed – I wanted to put my own sweat and tears into this thing. ¬†Oh, did I mention this is my first slab table, ever!?!

The slab is a bit un-even with some large to small cracks throughout. ¬†The shop didn’t have a planer wide enough to stick this thing thru, so they used a floor sander (not kidding) to get it somewhat sanded and smoothed on one side that will be the top side. ¬†They also knocked down the bottom side a bit but left it pretty rough.

One thing’s for sure, I’m going to get a decent amount of practice making and fitting Butterfly joints and inlays. There are a number of cracks throughout the slab, one large enough to completely see through. ¬† ¬†After the Buttefly joints on the bottom¬†are done I’ll be adding a few on the top along with adding¬†epoxy on the larger cracks.

Picture time…

IMG_7518

Delivered and in the garage, note the side that is facing up is actually the bottom. ¬†It’s still in very rough shape; un-even and very gouged. ¬†My first step was to put up some plastic in the garage (aka, my Dexter kill room) to keep the saw dust somewhat contained. ¬†I just wanted to smooth out the gouges on the bottom a bit.

 

IMG_7519

The other side (which will be the top side) has an amazing looking¬†‘flame’ pattern. ¬†Can’t wait to flip it back over and take some pictures for everyone.

 

IMG_7521 IMG_7525

Eventually got plastic hung up completely around the table. ¬†Unfortunately the tape doesn’t hold well (plastic is fairly heavy) in this Vegas heat, so it eventually fell down – ha. ¬†Luckily I got the majority of the bottom smoothed out a bit – just wanted to knock down the roughness.

 

Up next,¬†learning Butterfly joints…

Sloan Canyon

Went out to Sloan Canyon today for an impromptu trail cleanup. ¬†Sloan Canyon is just south of the strip (Las Vegas) and well situated in BLM, so the general area is popular with shooters. ¬†Unfortunately, it’s become a complete waste land of of computer monitors, shotgun shells and general trash ūüôĀ ¬† ¬†So, I made a day trip out of it: moved the Trasharoo over from my old rig, did some target shooting, hit some trails and picked up a couple garbage bags full of old cans, shells and plastic bottles.

On a ridge overlooking Jean Dry Lake Bed

On a ridge overlooking Jean Dry Lake Bed

 

IMG_4365

Same ridge, looking east into Sloan Canyon / Hidden Valley

 

Heading to the sand dune...

Heading to the sand dune…

 

Heading up.  Have some video of this, somewhere...

Heading up. Have some video of this, somewhere…

 

Looking west from atop the dune

Looking west from atop the dune

 

IMG_4407

 

IMG_4391

Snowy My Charleston in the background.

IMG_4415

Parking corral for a designated hiking trail.

IMG_4417 IMG_4420

IMG_4431

IMG_4430 IMG_4425

Alamo Road, North Las Vegas

Took an afternoon ride out North from Las Vegas via the 95.

  • Turn right (North) onto Corn Creek Rd
  • Just pass the visitor center, you’ll see a large road sign as below (1)
  • Turn left and continue on till Alamo, ~ 78 miles of easy graded road.

IMG_4243

IMG_4286

IMG_4288

Looking North towards the dry lake-bed

IMG_4291

Looking South, incoming weather

IMG_4247

IMG_4261  IMG_4269

IMG_4300  IMG_4278

New Rig, AEV JK-350

Well, bite the bullet and picked out a new ride. After a quick shipment from Oklahoma, I drove out to Cottonwood near Red Rock for desert snow pics; gotta love this crazy weather lately.

Looking forward to future off-road trips w/ the new rig.

AEV JK-350

AEV JK-350

Hydro-Blue AEV JK-350

Hydro-Blue AEV JK-350